Type 2 DC Surge Protective Device for PV System
Zivopower Type 2 DC Surge Protective Device is designed for photovoltaic systems to protect DC-side equipment such as solar panels and inverters from lightning surge damage. Available in 600VDC, 1000VDC, and 1500VDC versions, it features a pluggable design, 40kA maximum discharge capacity, and reliable protection for PV string boxes and inverter applications.
Type 2 DC Surge Protective Device for PV System
Zivopower Type 2 DC Surge Protective Device is developed for photovoltaic power supply systems to protect DC-side equipment against lightning surge currents and transient overvoltage. It is suitable for use in PV installations where reliable surge protection is required for terminal devices such as solar panels, string boxes, and inverters.
This product series is available in 600VDC, 1000VDC, and 1500VDC versions, with a maximum discharge current of 40kA. It adopts a pluggable modular design for convenient installation and maintenance, and is designed for parallel installation on the DC networks to be protected.
Product Features
- Type 2 / Class II DC surge protective device for photovoltaic systems
- Designed for protection against lightning surge currents and transient overvoltage
- Suitable for PV string box and inverter applications
- Available in 600VDC, 1000VDC, and 1500VDC versions
- Maximum discharge current (Imax): 40kA
- Nominal discharge current (In): 20kA
- Pluggable modular design for easier replacement and maintenance
- High energy MOV protective elements
- Fast response time ≤25ns
- Status indication: Green / Red
- 35mm DIN rail mounting
Applications
This DC SPD is suitable for photovoltaic solar applications and is typically installed on the DC side of the system to protect equipment such as solar panels and inverters. It is recommended for use at both ends of the DC power supply line, especially where cable routing is external or the line length is long.
Technical Specifications
| Product Type | Type 2 DC Surge Protective Device |
|---|---|
| Standard | IEC/EN 61643-31 |
| IEC / EN Category | Class II / Type 2 |
| No. of Poles | 2P (2 Modules), 3P (3 Modules) |
| Location of Use | String Box, Inverter |
| Mode of Protection | (DC+)-PE, (DC-)-PE, (DC+)-(DC-) |
| Protective Elements | High Energy MOV |
| Maximum Continuous Operating DC Voltage (Ucpv) | 600VDC / 1000VDC / 1500VDC |
| Nominal Discharge Current (In) | 20kA (8/20μs) |
| Total Discharge Current (ITotal) | 40kA (8/20μs) |
| Maximum Discharge Current (Imax) | 40kA (8/20μs) |
| Voltage Protection Level (Up) |
2P: 2.6kV / 4.0kV / - 3P: - / 4.0kV / 5.2kV |
| Response Time | ≤25ns |
| Operating Temperature Range | -40°C to +80°C |
| Status / Fault Indication | Green / Red |
| Cross-section Area | 4mm² to 35mm² |
| Mounting | 35mm DIN Rail, EN 60715 |
| Enclosure Material | Thermal Plastic UL94-V0 |
| Degree of Protection | IP20 (built-in) |
| Housing Design | Pluggable Design |